Energic Tracteur 519 – Indénor TMD Diesel (available from 1955).
Energic 519 Indénor TMD Diesel “Fermier” model.
Energic 519 diesel TMD 80 “Vigneron” model.
Engine. T.M.D. Diesel Motor, 20/25cv, 1608cm3, 18cv @ 1600 rpm 25cv @ 2200 rpm, 4 cylinder, 4 stroke/4 temp OHV (Soupapes en tete), alésage 80 x course 80, high pressure oil pump for greater oil circulation. Pre heater plugs for cold starts. With calorstat.
Air filter. In a bath of oil.
Clutch. Single-disc dry type.
Gears. 4 forward speeds and 1 reverse or 6 forward and 3 reverse gears. Differential blockable by a foot pedal (for very poor terrain where additional non-slip traction is required).
Gear ratios/speeds at 2000 revs. per min.;1st 2.8kms, 2nd 4.6kms, 3rd 6.7kms and 4th 18kms.
Fuel consumption: 2 1/4. and 2 1/2 litres per hour. depending upon the work/engine load.
Cooling. Liquid-cooled radiator with 6-blade fan.
Instrument panel It had the following gauges and switches; Oil pressure light, temp. gauge water, Amp gauge, light switch, preheater switch/bar, motor stop button, manual accelerator lever, preheater visual coil. Optional extra; tractor working hours counter. There is a fuse box that is easily accessed able behind the instrument panel.
Electrics. Electric starter, lights front and rear, Batterie 12v 60amps,
3-point hitch. Options; Relevage automatique et méchanique – Dynabloc/Breveté S.G.D.G.
The 3-point lift has been tested for 200 000 lifts of 250kgs, which represents 15 to 20 years of operation on an average farm without any mechanical problems. There are 2 types of connections available Type 519 and type S. See photos below for the difference.
Braking. Independent for each wheel or bloc together ( a hand brake is also available operating on the 2 back wheels as normal breaking).
Tyres/Pneu. Front/avant 400 x 15. Rear 8 x 24 or 9 x 24 or 900 x 24(11 x 24) + supplementary price.
PTO / Prise de force. Axiale.
Adjustable widths; 2 types of tractor; Narrow/vigneron model; 0.87m to 1.20m. Standard/Fermier model; 1.15m to 1.50m.
Axles. Reinforced tubular front axles to withstand greater loads and width adaptability.
Bonnet. Hinged forward for easy access to engine components, oil, fuel and servicing.
Dimensions: Length 2.5m, width 1.5m, height to bonnet 1.25m, seat height .9m.
Weight: Between 1,110kg and 1,180kg, with masses 1,202kg/1,272kgs. You can add water into the tyre to add 118kg in total.
Optional extras/implements: Heavy wheels front + 80kgs. An additional gear selector, which doubles the number of gears to 8 gears. The 8 gears give the following ranges:3 gears for when very slow to slow speed is required, 3-speed normal range usage and 2 for high speed such as road work. The passenger seat on the normal tractor on both sides.
Additional equipment; Sprayer/Pulvérisateur 200 litres, Hub to operate belt (renvoi perpendiculaire et sa poulie photo. Winch/Treuil arriere et poulie de renvoi.
**** Rear lift. Relevage méchanique &/et hydraulic – Dynabloc/Breveté S.G.D.G.****
Dynabloc S (Attelage type S). Low maintenance Mechanic/méchanique, lifting capacity of 250 kgs, The PTO/prise de force comes out of the back of the Dynabloc system when lifted out of the way. You can either tow from the hitch – chap/crochet on the Dynabloc or use the bar to lift implements/outils. This system was fitted to the early 511/510/512 tracteurs as shown on the vigneron 511 photo above.
Brabant 1/2 turn mouted on l’attelage type S.
Dynabloc Hydraulic lift/revelage hydraulique. Using a bar lift system the type 519 – operating through the pressure of oil through/in the Dynabloc, that can be infinitely variable for height, tolerance and pressure.
Energic patented attachment procedure for implements on the Dynabloc lift/revelage. From 1, the positioning the tracteur lifting bar in – to the final hitch on position 5.
****Photo gallery implements available on the Energic 519 tracteurs****
Gallery Fermier;
Gallery Vigneron;
******
Towards the last production dates of the Energic TMD 519, the moteur Indenor XDP 4.85 was used. Offering more power and transitioning into the second model/generation with different upgraded bodywork. (4 cylindres 1816 cm3, 35 ch à 2500 tr/mn 8 vitesses AV, 2 vitesses AR).
Energic 519 second generation – 2 models; Fermier and vigneron.
***
Energic 519 tracteur Fermier type 2.
Details as type 1.
Changes; In 1965 the 519 Diesel was equipped with an Indénor TMD 85 engine and Ramus or MGF hydraulic lift) 25/30cv higher output.
Dimensions: Length 2.5m, width 1.65m, height to bonnet 1.25m, seat height 0.9m.
Read more Energic Engine/Moteur supplier Indenor here.
*******
.Read more about Energic Engine/Moteur supplier Peugeot here.
Read more about Energic Sachs Engines/Moteurs here.
Read more about Energic Steyr engine/moteur tracteur 580 here.
Read more about Energic Engine suppliers Ruggerini here.
See more on Facebook page: www.facebook.com/energic.info
If you like my Facebook page then I can put more information on it./ Si vous aimez ma page Facebook, je peux mettre plus d’informations à ce sujet.