Energic 225 Motoculteur (series 220).
Engine/Moteur. Moteur Bernard W 110 BIS, 5cv , 5cv at 2500 tp/m, single cylinder, 4 stroke, OHV valves, Alésage 69mm x Course 64mm. Cylinder 240cm3. The cylinder in aluminium, with the cylinder bloc and inserts in special heat resistant metal. Cylinder head hemispheric type. Pistons aluminium-silicon-copper mix high wear resistance. Pushrods made from duralumin, regularable. The crankshaft (villbrequin) mounted on bearings and tapered bearings.
Read more about Bernard engines/moteurs here.
Carburateur. Solex 22 NH or Zenith 22 RX both automatic.
Cooling. By air circulation.
Lubrication. Oil splash and spray from sump and pressure system.
Starting. By hand turning the pulley at the front of the engine, usually with twine/cord.
Magneto/spark. Generated from a magnetic system. Regulateur centrifuge.
Air filter/Cleaner. Filter in a bath of oil.
Gears. 3 forward and 1 reverse gear, using a second sprocket/inversion you can get 6 forward and 2 reverse. (Inverter). Sprockets 18 49 teeth). Further combinations of gears can be obtained at an additional cost.
Clutch. Multiple discs immersed in oil. Soft and subtle, enabling smooth transition in gears and measured starting.
PTO. Rear. (prise de force) 170- 1150 tr/m with 3 sizes of poulies 110-150 and 150mm. And in all cases, the poulie front can act as a PTO.
Exhaust/Silencer. Fitted to the right-hand side in a frontal position (viewed from the rear looking forward), away from the driver.
Steering. By directing the handlebars, handlebars been adjustable for height.
Additional equipment. Brakes, Fully automatic wheel width regulation. potato lifter/arrache pomme dr terre, barre de coupe 1.45m, various ploughs (15 – 22cms) – brabant, buttior, bineuse, charrue simlpe 3 types, bi-soc ploughs, cultivateurs, expirpateur 5 dents, rotivator/fraise rotaive – 350/500mm, harrow/herse, wheel weights/masses, extra sprockets in the gearbox to double the gears, poulie 110mm, various towing brackets/attelages, sprayers/ pulverisateur 100liters- pipe- 1 lance, metal wheels/roues méttaliques, seed planter/semoir, winch/treuil and various variations on wheel sizes and dimensions.
Wheels. Pneumatic Tyre wheels 400 x 12 (hoeing/weeding) or additional cost option 500 x 15 (limited ploughing) or 650 x 16 (ploughing). Blockage is independent for each wheel. With the option of “Moyeux auto-réglables” you can alter the width of the motoculteur between 50cm and 80cm, depending upon the size and dimensions of the wheels.
Brakes. Drum type, independent and regularable.
Hitch. Manual universal hitch with metal pin to attach diverse ancillary equipment, ploughs, hoes, etc. Paint special polymérisée.
Weight. 220 kgs With additional wheel weights of approx. 23kgs single or (46kgs) double. Also, it is possible to fill the tyre with water for extra traction and weight.
The 220 series uses the same moteur – boite – pont formation that is rigid with exceptional strength, adopted from the tried and tested 409 motoculteurs.
Transformed. Rapidly into a winch, grass cutter etc., with the correct 200 series adaptions as optional extras.
The following implements were available across the 220 series and used throughout the production history;
Specialist lifters and cutters;
Hitches/Attachments – sulkys
Read more about the Energic motoculteur 409 here.
Read more about the Energic Motoculteur 410 here.
Read more about the Energic motoculteur 411 here.
Read more about Energic Tracteur 519 T.M.D.Indenor engine/moteur here.
Read more about Energic Engine suppliers Ruggerini here.
Read more about Energic Engine/Moteur supplier Peugeot here.
Read more about Energic Sachs Engines/Moteurs here.
See more on Facebook page: www.facebook.com/energic.info
If you like my Facebook page then I can put more information on it./ Si vous aimez ma page Facebook, je peux mettre plus d’informations à ce sujet.