Energic Motoculteur 412

Energic motoculteur 412

Engine/Moteur. Sachs Single cylinder 604cm3, 12-14 cv, 2 stroke Air cooled, alésage 88 x course 100, as per 712 d,en. With a chamber of pre-combustion. Injection – Bosch. Compression 20:1.

Read more about the Energic moteur supplier Sachs here.

Injection. Bosch, Hochdruckschlauch, Porte Injektor. Presser of injection 120 kg/cm3.

Lubrication. Durch ständige Zirkulation von Öl, das über eine Pumpe im Sumpf des Motors gehalten wird.

Cooling. Ein großer Aluminiumlüfter ist vorne am Motor montiert, running on ball bearings. This system draws air into the hood circulating around the engine, ensuring cooling. Dieses System wurde bei extrem hohen Temperaturen getestet und hat sich als wirksam erwiesen.

Starting. Electric start.(standard after 1963).

Air filter/Cleaner. Filter in a bath of oil.

Fuel filter. Cartouche.

Gears. Box S.G.D.G.Das Dreiganggetriebe ist im Motorenangebot integriert 6 forward and 3 reverse gears.

Clutch. Mono disc sec. Die Bedienung erfolgt über einen nach oben gezogenen Hebel am linken Lenker.

Auspuff / Schalldämpfer. Auf der linken Seite in Frontalposition montiert (viewed from the rear looking forward), away from the driver.

Steering. Independent wheel clutches makes steering very easy. De-clutching one wheel, and using reverse gear allows the motoculteur to be turned in its own width without undue effort.

Tyres/Wheels. Dunlop CR tyres size 750 x 18 for ploughing (labour) and 650 x 16 or T 32 for grass cutting ( Fraiasage). Metal wheels are available 500 for grass cutting and 700 for ploughing. Wheel width is regular-able between 64 cms and 85 cms in 9 settings. In metal wheels 53 cms to 83 cms.

Blockade ist independent for each wheel.

Hitch. Articulated pivoted strengthened bar, Breveté system S.G.D.G. (patented in France and the UK), with universal fitment to all ancillary equipment. Enabling the adjustment of draft and other characteristics required to operate the implements at different depths.

Ploughing depth. Up to 12 ins (30,48 cms) dependent upon soil conditions.

Fuel consumption. 1 to 1.5 litres of fuel per hour dependent upon working conditions. The tank holds approx. 9 litres.

Throttle control. Bedienung unter der rechten Seite des Lenkrads (while positioned facing forward).

Weight. 470 kgs (with starter). Mit zusätzlichen Radgewichten, insgesamt waren 92kg in Kombination erreichbar. Ebenfalls, Es ist möglich, den Reifen für zusätzliche Traktion und Gewicht mit Wasser zu füllen + 66 kgs.

Speeds. With 1st gear giving 1.81kmph, 2nd – 2.49kmph, 3rd – 3.39kmph, 4th 5.79kmph, 5th 7.74kmph and 6th gear giving 10.45kms per hour. @ 2000 rpm.

Dimensions. 3m 47cms long, (without any back tools, frame etc., 2m 20cms).

In February 1963 the 412 rototiller (with electric start) was offered in 2 model versions;

Model A for drilling/milling, with no wheel masses or tow hitch, mit Metallschaufelrädern, cost 7057 francs. Alternatively with tyres size 650 x 16 at a cost of 7170 francs.

Model B for work with towing hitch for implements, wheels with tyre 750 x 18 (Michelin CR) cost 7650 francs.

Supplementary equipment costs;

Starter electric 45/60 amps – dynamo, full set of electrics/light + 176 francs. Lenker höhenverstellbar + 24 francs, brakes operated from the additional levers on the handlebars.

***

Die folgenden Geräte waren in der gesamten Welt verfügbar 400 series starting on the 409 of 1946 und in der gesamten Produktionsgeschichte verwendet;

Cultivateurs/Extirpateur

Bineuse

buttoir

Specialist lifters and cutters

Pflüge

Hitches/Attachments – sulkys

****************

Plaques;

*******

Read more about the Energic factory history here.

Read more about the Energic motoculteur 409 here.

Read more about the Energic Motoculteiur 410 here.

Read more about the Energic motoculteur 411 here.

See more on Facebook page: www.facebook.com/energic.info

If you like my Facebook page then I can put more information on it./ Si vous aimez ma page Facebook, je peux mettre plus d’informations à ce sujet.