Tracteur Treuils/Winches

Tracteur Treuils/Winches.

Initially used before the 3 point hitch system to lift and place the plough. The Treuil (winch) was used for pulling heavy ploughs up steep inclines, to greater depths and in difficult terrain where the tracteur or conventional motoculteur machinery would struggle.

El Treuil se instaló en los primeros tractores producidos por A Patissier Ets.. The 511, 518, 525 (versión antigua con tecnología CLM) then the 512, 519, y así sucesivamente en toda la gama hasta finales de la década de 1950.

Here is the factory fitment treuil/Winch to the 511 mark 1 tractor.

Energic 511 cabrestante de gasolina www.energic.info

Energic tracteur 511 6v gasolina treuil www.energic.info

Model B from 1953 fitted with a winch/treuil option.(steel cable 100, 150 and 200 meters in length). El cabrestante podría ser operado en 6 speeds. It was primary used in the following conditions; when the soil is very heavy (a base de arcilla), when cutting the earth was impossible with a pulled plough, when pulling very heavy loads/logs. The winch pulley pulls the cable from the side. It could be fitted with other ancillary equipment modified for specific use. También, puede colocar un gancho / barra para remolcar.

Aquí hay un temprano 518 (Petrol/essence) factory fitted with a treuil.

Here is a early 518 (Petrol/essence) equipado de fábrica con un treuil www.energic.info